China Best Sales Stepper Motor Drive Dosing Pump for Ceramic Vacuum Filter near me factory

Product Description

Dosing Machine

Product Description

1. Constitutes of the dosing equipment
Major components of this equipment: 1. solution tank 2. stirrer 3.liquidometer 4.filter 5.safety valve 6.
dosing dump. 7.bumper 8.ball valve, check valve and stop valve. 9. pressug gege and corresponding pipes.
Explanation: the pumping capacity of diaphragm dosing pump is 5001/h and pressure 0-1.0mp.
motor capacity of diaphragm dosing pump is 0. 75 W with insulation grade of level F; the stirrer is comprisee
of motor and stiring rod with motor capacity of 0.55kW; all inner components of the equipment including
working platform and handrail are all installed on the same carbon steel base plate.

2.Main Characteristics of the Dosing System
1.concentration design, small floor space, simple structure and stable performance; 2. accurate
measurement, convenient regulation, economic and easy installation and maintenance; 3. suction type
installation of the pump, no-blocking, long non-failure operation time and low operating cost;  4. good
corrosion resistance performance and long lifespan; 5. material of the liquor tank: PE, fiberglass, coal steel
rubber liner, 304 stainless steel, 316 stainless steel; 6. material of the stirrer: 304 stainless steel and 31 6 stainless
steel; 7. material of overflowing section of the dosing pump: PP. PVC. PVDE. SS316

3. Applications
It is widely used in raw material of power plant, boiler feed water and oil field surface gathering
dehydration processing system, various petrochemical dosing system and waste water treatment
system, such as adding coagulant, phosphate, ammonia cal liquor, whitewash, corrosion inhibitor
antisludging agent and germicide, algicide agent, etc.

Company Profile

Our Company

ZheJiang Botong Environmental Production Technology Co., Ltd. is engaged in mining machinery production enterprises for many years. Our subsidiary includes Filta(ZheJiang ) Environmental Technology Ltd. Mechanical product development and production of varous types, mainly the production of mineral processing equipment, such as Ceramic Filter, Thickener, Cyclone, Dosing Machine.

The company has aleays been to adhere to the “Build reputation with quality, Expand the market with reputation, seek benifits from the market and seek development with benefits. ” Development concept.

Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of “quality first, customer first and credit-based” since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a CZPT situation since the trend of economic globalization has developed with anirresistible force.

After Sales Service

Our Service

1. Our Service:
(1) Select equipment model;
(2) Design and manufacture products according to clients’ special requirement;
(3) Train technical personnel for clients.

2. Serivces during the sale:
(1) Pre-check and accept products ahead of delivery;
(2) Help clients to draft solving plans;
(3) Xihu (West Lake) Dis. clients how to install equipment successfully without problem.

3. After-sale services:
(1) Assist clients to prepare for the first construction scheme;
(2) Install and debug the equipment;
(3) Train the first-line operators on site.

FAQ

FAQ

1.Q:What Information needed to get accurate quotation and proposal?
A:1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone, what is the general particle size(mm) of the raw ore?
3). What is the handling capacity (tons per hour) you need?
4) .What is the elements of the raw ore? How much percent % of each minerals?

2.Q:Can we send the mineral samples to you to run the ore-dressing experiment test?
A:?Yes, we can run the ore-dressing experiment for our customers. After the test, we will give you the reasonable flowchart, suitable solution and equipment selection. etc. based on the test results.

3.Q:What about warranty of the equipment? Any spare parts supplied?
A:The warranty period of?OASIS?equipment is 12 months. And of course we will supply the spare parts to you for life-long time at lowest cost.

4.Q: Why you choose me?
A:1). Professional manufacturer of supplying mining equipment, Ore beneficiation equipment and mining dryers.
2). Experienced and professional R&D team and manufacturing team.
3). Professional sales team consisted of dedicated, dynamic and innovative staff with international version.
4). Professional logistics service ensuring safety and timely delivery of products all over the world.

Drive shaft type

The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are 3 main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
air-compressor

tube yoke

Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
air-compressor

end yoke

If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join 2 heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new 1 or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.

China Best Sales Stepper Motor Drive Dosing Pump for Ceramic Vacuum Filter     near me factory China Best Sales Stepper Motor Drive Dosing Pump for Ceramic Vacuum Filter     near me factory