China Good quality Electric Drive with Ysd1350 Rock Mtbm with Nodular Cast Iron with Great quality

Product Description

YSD1350 ROCK PIPE JACKING MACHINE

 


 

 

Product Description

Pipe Jacking Machine 2000mm designed for large pipe jacking engineering , generally used in the construction of cement pipe crossings, building houses translation, sewers, roads and rivers as a sheathing of other projects across a variety of channels.

Principle
Pipe jacking construction is in the work in the pit ,by means of jacking Machine which produce jacking force, and overcome the friction between the pipes and the surrounding soil.
Jacking the pipes Into the soil at the design slope.and Removed soils .
After a section of pipe finish jacking into the soil , then the second section of the pipes continue to jack into the soil , The principle is by means of the thrust of the main cylinder    pipeline, intermediate jacking station,and other thrust pushing the tool pipe or heading machine (through the soil )from working well to the receiving well and Lift up. Then , embed the pipes between the 2 wells.

 

Main Features:
Whole Section rock earth pressure display system.
The separated single grouting system for cutter panel and spindle center.
The rear of jacking pipe machine equipped with jacking device and prevent deviation device.
Disk cutter adopts famous China brand.
Planetary gearbox adopts Italian BREVINI.
Adopt touch screen, PLC Inverter and other advanced control system.
The data displayed on the touch screen can be connected to users  office monitor through RS232 interface.

Advantage
The advantage of this technique is no excavation on the ground,Do not demolition,Does not destroy the ground buildings;Don’t damage the environment,Does not affect pipeline segment deformation,Time-saving, efficient, safe, low overall cost.
The technology are widely used in urban underground water supply and drainage pipeline,Natural gas pipeline,Communication cable and other non excavation laying.It can through the highway, railway, bridge, mountains, rivers, channel and any building on the ground.The use of the technology construction, can save a large amount of land acquisition and demolition costs,also can reduce environmental pollution and road congestion,It has significant economic and social benefits.

Working frequency
1.Using in ROCK condition
2.Widely used in Southeast Asian countries, ZheJiang , and Japan.
3.Inside cement pipe dia from 1000-3200 mm
4.Professional manufacturer who can produce ROCK pipe jacking machine in China.
 
Packaging & Shipping
Nude Packing
Delivery Detail:
60 days after 30% deposit receiving
 
Our Services
 We will send professional technician to your project site to operate the pipe jacking machine and train operators for the project,  
1.On site service support;
2. 12month warranty;
3.Life time service support,
 
5. 7 days*24hours Hot-line & Email Service. 
6.Your inquiry related to our pipe jacking machine will be replied within 24 hours.Well-trained and experienced staff will answer all your questions in fluent English.
 
 Warranty
If quality & assembling problem caused troubles, we take responsible on spare parts and all service fees.
If misuse or human factors caused the trouble, users shall take responsible on spare parts and all service fees.
 
Company Information
ZheJiang Xuanxuan Heavy Machinery Co.Ltd is affiliated with Weiqiang Group.It’s located in HangZhou city,ZheJiang Province,is located in the center of the Yangtze River Delta,the north part close to Yangtze River, the south part close to Lake Xihu (West Lake) Dis., and East part is close to the East China Sea.Is the birthplace of modern Chinese industrial, modern equipment manufacturing city. It Has a superior geographical advantage and convenient land and sea and airtransportation conditions.
WeiQiang group was founded in 1989,More than 30 years of history, now,It Consists of several companies,such as  Weiqiang Chemical, Weiqiang machinery,  XuanXuan heavy Machinery , it was assessed as “private technology enterprises in HangZhou City”,”High-tech enterprises in ZheJiang Province ” Private science and technology enterprises in ZheJiang province “.
ZheJiang Xuan Xuan Heavy Machinery Co., Ltd. professional design and manufacture trenchless engineering equipment,integrate Product development, manufacturing, marketing and after-sales service .Products include multi-series pipe jacking machine, shield machine, pipe jacking equipment and spare parts spare parts.
Products include multi-series pipe jacking machine, shield machine, spare parts of pipe jacking machine, shield machine,Hydraulic oil cylinder, hydraulic system, lubricating system, pneumatic system, PLC control system and non-standard equipment.The company attaches great importance to the development of new technology and new products.In recent years, In recent years, vigorously invested in the non-excavation pipe jacking equipment, hydraulic systems, and had done a lot of fruitful work.It has successfully developed a slurry balance, earth pressure balance and series of multi-type excavation products,It has been  successful application in domestic market,  
The company attaches great importance to product quality management, and establish a standardized and systematic quality management platform, strict requirements, excellence, our goal is to provide customers with high-quality engineering equipment.  Company will provide high-quality pre-sale, sale, after-sales service,Companies to provide high-quality pre-sale, sale, after-sales service, At any time, provide product consulting,   use  guidance, etc.
Adhering to the service purposes of “active”, professional specialization, efficiency first ” we aim to provide quality products and excellent service to our customers. To achieve the expectations of customers and exceed goals of Industry standard. 
Xuan Xuan heavy industry based on long-term development strategy, follow the “conservation, security, service,” the 3S product concept, and vigorously promote scientific and technological innovation, continuing to provide customers with quality products and services. 
FAQ
In order for you to get a better price and technical solutions. Please provide the following required parameters:
1. Project total length, distance for 1 section, how many sections will be built? 
2 Pipe type: concrete or steel etc, single length of the pipe? outer and inner diameter ? 
 3 Projects information: for water supply, sewage project? 
 4 Underground water level; 
 5 Soil type? soil report is needed.

 

How to tell if your driveshaft needs replacing

What is the cause of the unbalanced drive shaft? Unstable U-joint? Your car may make clicking noises while driving. If you can hear it from both sides, it might be time to hand it over to the mechanic. If you’re not sure, read on to learn more. Fortunately, there are many ways to tell if your driveshaft needs replacing.

unbalanced

An unbalanced driveshaft can be the source of strange noises and vibrations in your vehicle. To fix this problem, you should contact a professional. You can try a number of things to fix it, including welding and adjusting the weight. The following are the most common methods. In addition to the methods above, you can use standardized weights to balance the driveshaft. These standardized weights are attached to the shaft by welders.
An unbalanced drive shaft typically produces lateral vibrations per revolution. This type of vibration is usually caused by a damaged shaft, missing counterweights, or a foreign object stuck on the drive shaft. On the other hand, torsional vibrations occur twice per revolution, and they are caused by shaft phase shifts. Finally, critical speed vibration occurs when the RPM of the drive shaft exceeds its rated capacity. If you suspect a driveshaft problem, check the following:
Manually adjusting the imbalance of a drive shaft is not the easiest task. To avoid the difficulty of manual balancing, you can choose to use standardized weights. These weights are fixed on the outer circumference of the drive shaft. The operator can manually position the weight on the shaft with special tools, or use a robot. However, manual balancers have many disadvantages.
air-compressor

unstable

When the angular velocity of the output shaft is not constant, it is unstable. The angular velocity of the output shaft is 0.004 at ph = 29.5 and 1.9 at t = 1.9. The angular velocity of the intermediate shaft is not a problem. But when it’s unstable, the torque applied to it is too much for the machine. It might be a good idea to check the tension on the shaft.
An unstable drive shaft can cause a lot of noise and mechanical vibration. It can lead to premature shaft fatigue failure. CZPT studies the effect of shaft vibration on the rotor bearing system. They investigated the effect of flex coupling misalignment on the vibration of the rotor bearing system. They assume that the vibrational response has 2 components: x and y. However, this approach has limited application in many situations.
Experimental results show that the presence of cracks in the output shaft may mask the unbalanced excitation characteristics. For example, the presence of superharmonic peaks on the spectrum is characteristic of cracks. The presence of cracks in the output shaft masks unbalanced excitation characteristics that cannot be detected in the transient response of the input shaft. Figure 8 shows that the frequency of the rotor increases at critical speed and decreases as the shaft passes the natural frequency.

Unreliable

If you’re having trouble driving your car, chances are you’ve run into an unreliable driveshaft. This type of drivetrain can cause the wheels to stick or not turn at all, and also limit the overall control of the car. Whatever the reason, these issues should be resolved as soon as possible. Here are some symptoms to look for when diagnosing a driveshaft fault. Let’s take a closer look.
The first symptom you may notice is an unreliable drive shaft. You may feel vibrations, or hear noises under the vehicle. Depending on the cause, it could be a broken joint or a broken shaft. The good news is that driveshaft repairs are generally relatively inexpensive and take less time than a complete drivetrain replacement. If you’re not sure what to do, CZPT has a guide to replacing the U-connector.
One of the most common signs of an unreliable driveshaft is clanging and vibration. These sounds can be caused by worn bushings, loose U-joints, or damaged center bearings. This can cause severe vibration and noise. You can also feel these vibrations through the steering wheel or the floor. An unreliable driveshaft is a symptom of a bigger problem.
air-compressor

Unreliable U-joints

A car with an unreliable U-joint on the drive shaft can be dangerous. A bad u-joint can prevent the vehicle from driving properly and may even cause you trouble. Unreliable u-joints are cheap to replace and you should try getting parts from quality manufacturers. Unreliable U-joints can cause the car to vibrate in the chassis or gear lever. This is a sure sign that your car has been neglected in maintenance.
Replacing a U-joint is not a complicated task, but it requires special tools and a lot of elbow grease. If you don’t have the right tools, or you’re unfamiliar with mechanical terminology, it’s best to seek the help of a mechanic. A professional mechanic will be able to accurately assess the problem and propose an appropriate solution. But if you don’t feel confident enough, you can replace your own U-connector by following a few simple steps.
To ensure the vehicle’s driveshaft is not damaged, check the U-joint for wear and lubrication. If the U-joint is worn, the metal parts are likely to rub against each other, causing wear. The sooner a problem is diagnosed, the faster it can be resolved. Also, the longer you wait, the more you lose on repairs.

damaged drive shaft

The driveshaft is the part of the vehicle that connects the wheels. If the driveshaft is damaged, the wheels may stop turning and the vehicle may slow down or stop moving completely. It bears the weight of the car itself as well as the load on the road. So even a slight bend or break in the drive shaft can have dire consequences. Even a piece of loose metal can become a lethal missile if dropped from a vehicle.
If you hear a screeching noise or growl from your vehicle when shifting gears, your driveshaft may be damaged. When this happens, damage to the u-joint and excessive slack in the drive shaft can result. These conditions can further damage the drivetrain, including the front half. You should replace the driveshaft as soon as you notice any symptoms. After replacing the driveshaft, you can start looking for signs of wear.
A knocking sound is a sign of damage to the drive shaft. If you hear this sound while driving, it may be due to worn couplings, damaged propshaft bearings, or damaged U-joints. In some cases, the knocking noise can even be caused by a damaged U-joint. When this happens, you may need to replace the entire driveshaft, requiring a new one.
air-compressor

Maintenance fees

The cost of repairing a driveshaft varies widely, depending on the type and cause of the problem. A new driveshaft costs between $300 and $1,300, including labor. Repairing a damaged driveshaft can cost anywhere from $200 to $300, depending on the time required and the type of parts required. Symptoms of a damaged driveshaft include unresponsiveness, vibration, chassis noise and a stationary car.
The first thing to consider when estimating the cost of repairing a driveshaft is the type of vehicle you have. Some vehicles have more than one, and the parts used to make them may not be compatible with other cars. Even if the same car has 2 driveshafts, the damaged ones will cost more. Fortunately, many auto repair shops offer free quotes to repair damaged driveshafts, but be aware that such work can be complicated and expensive.

China Good quality Electric Drive with Ysd1350 Rock Mtbm with Nodular Cast Iron     with Great qualityChina Good quality Electric Drive with Ysd1350 Rock Mtbm with Nodular Cast Iron     with Great quality