China Professional Solar Tracker System Single Axis with Linkage Motor Drive Solar Power Panel Tracking System near me shop

Product Description

Product Description

                   Single Axis Solar Panel Independent Tracking System with Linkage Motor Drive

Single Axis Panel Independent Tracking System with Linkage Motor Drive uses rotary linkage motor drive, double row connected at the same time drive, higher strength, stronger stability. It can track the sunlight in real time and search for light intelligently. Comparing with thetraditional fixed bracket, the power generation can be increased by 10-15%. This system is suitable for multi scene large power station. 

Features

1, The traditional square tube girder design has better adaptability. 
2, Adopting fishbone purlin, which is better strength, better stability and easy installation.
3,  Max. gradient difference adaptability in N-S direction up to 15%.
4,  Excellent compatibility with all the mainstream solar modules available in the industry: frame, frameless and bi-facial. Independent 2V module design, which reduces the quantity of piles and the construction cost significantly.
5,  Free obstacles among trackers in N-S direction, easy to maintain and clean.
6,  Its design is configured with 1 single set of controller,  which ensures point-to-point real-time monitoring, easy to detect fault points in time every day and reduce output loss.
7,  Reducing the cost and energy consumption comparing with single axis with independent tracking system.
8,  Independent design, various land form adaptability. 

 

Product Advantages
Middle rotary drive, 2 measuring belts damping, enhance damping, reduce resonance. 
Rotary drive system, tracking angle can be reached ±60°
The linkage shaft can be adjusted in all directions, and is not affected by high and low staggering.
Single motor drive, greatly reduce the cost. 

 

System Advantages 
String power, backup battery, safe and reliable
Wireless communication, optimized layout, simple and efficient
Intelligent tracking all day to improve power generation
Internet cloud data transmission, 5G transmission, real-time monitoring, fast and efficient.

 

Product Parameters

Electrical system parameters
Control mode  MCU
Tracking accuracy
Protection level IP65
Ambient temperature -40ºC-85ºC
Power supply type AC110-500/DC 300-1500
Monitoring device Remote monitoring(optional)
Communication mode Wireless / wired communication

 

System basic parameters
Driving form Rotary device 
Foundation type Cement foundation / Steel pile foundation
Component type Single glass panel / double glass panel / frameless panel
Tracking range  ± 50 °
Panel layout Single row vertical/ double row vertical
Minimum height above ground 0.3m(lowest point)
System life  More than 30 years
Work speed ≤18m/s
Resistance to wind speed  ≤50m/s

 

Detailed Photos

Project

 

Company Profile

ZHangZhoug ChuHangZhou New Energy Co., Ltd, was established in 1999, headquartered in HangZhou city, half an hour from ZheJiang city by speed train. With 22 years of production experience, the quality has been certified by TUV, SGS, ISO 9001 etc. As a leader in the global photovoltaic system industry, the company focuses on the research and development, design, production, engineering installation services and system solutions of support structure products, with application in photovoltaic and construction.      

Chuanda‘s main business includes aluminum frame, PV mounting and tracking system, distributed power station development, pipe corridor brackets etc. It is 1 the largest professional manufacturer of PV mounting and tracking system in China and the Asia-Pacific region. ChuHangZhou is committed to providing professional, efficient, and reliable photovoltaic system solutions to global customers. As of 2571, the cumulative global installation of photovoltaic mounting and tracking system has exceeded 15 GW, the cumulative turnover of all the business exceeds 1 billion in RMB.
 

Workshop

Certifications

Cooperation Partners

FAQ

Q: Are you a manufacturer or a Trading company?

A: We are a leader manufacturer of solar PV mounting systems and related accessories since 1999, with rich practical experience and mature production technology, and has several production lines, and our products have won the favor of customers from all over the world.

 

Q: What can you get from us?

A: -Professional analysis on the project, supply professional design and drawings from the engineers team
-Big annual capacity of 5GW will guarantee the fast delivery for all the clients
-24H services before selling and after selling from our engineers team and sales team
-High quality control system to guarantee the high quality for every order
-Competitive price from good management on supplier-chain system and high automated equipment
-New products launching every year
-New information from market and industry updating every month
-5 years’ warranty

 

Q: How to guarantee the quality?

A: – A counter sample will be confirmed and sealed by both sides before bulk production.
-The professional prodution technical instruction is available for all the bulk procedure.
-3 QC steps for every order, including incoming material inspetion, on-site inspection and final inspection.
– Professional testing will be done according to the detailed standard.
 

Q: Why we are better?

A: – Big production capacity, 2 production base in China.
– Rich production experience, we have 22 years in this industry.
– More than 30 professional engineers for quality control and R&D.
– Competitive price, 5-10% better than the market price, as we have a good raw material supplier chain and quality control system.

 

What is a driveshaft and how much does it cost to replace one?

Your vehicle is made up of many moving parts. Knowing each part is important because a damaged driveshaft can seriously damage other parts of the car. You may not know how important your driveshaft is, but it’s important to know if you want to fix your car. In this article, we’ll discuss what a driveshaft is, what its symptoms are, and how much it costs to replace a driveshaft.
air-compressor

Repair damaged driveshafts

A damaged driveshaft does not allow you to turn the wheels freely. It also exposes your vehicle to higher repair costs due to damaged driveshafts. If the drive shaft breaks while the car is in motion, it may cause a crash. Also, it can significantly affect the performance of the car. If you don’t fix the problem right away, you could risk more expensive repairs. If you suspect that the drive shaft is damaged, do the following.
First, make sure the drive shaft is protected from dust, moisture, and dust. A proper driveshaft cover will prevent grease from accumulating in the driveshaft, reducing the chance of further damage. The grease will also cushion the metal-to-metal contact in the constant velocity joints. For example, hitting a soft material is better than hitting a metal wall. A damaged prop shaft can not only cause difficult cornering, but it can also cause the vehicle to vibrate, which can further damage the rest of the drivetrain.
If the driveshaft is damaged, you can choose to fix it yourself or take it to a mechanic. Typically, driveshaft repairs cost around $200 to $300. Parts and labor may vary based on your vehicle type and type of repair. These parts can cost up to $600. However, if you don’t have a mechanical background, it’s better to leave it to a professional.
If you notice that 1 of the 2 drive shafts is worn, it’s time to repair it. Worn bushings and bearings can cause the drive shaft to vibrate unnecessarily, causing it to break and cause further damage. You can also check the center bearing if there is any play in the bearing. If these symptoms occur, it is best to take your car to a mechanic as soon as possible.
air-compressor

Learn about U-joints

While most vehicles have at least 1 type of U-joint, there are other types available. CV joints (also known as hot rod joints) are used in a variety of applications. The minor axis is shorter than the major axis on which the U-joint is located. In both cases, the U-joints are lubricated at the factory. During servicing, the drive shaft slip joint should be lubricated.
There are 2 main styles of U-joints, including forged and press fit. They are usually held in place by C-clamps. Some of these U-joints have knurls or grooves. When selecting the correct fitting, be sure to measure the entire fitting. To make sure you get the correct size, you can use the size chart or check the manual for your specific model.
In addition to lubrication, the condition of the U-joint should be checked regularly. Lubricate them regularly to avoid premature failure. If you hear a clicking sound when shifting gears, the u-joint space may be misaligned. In this case, the bearing may need to be serviced. If there is insufficient grease in the bearings, the universal joint may need to be replaced.
U-joint is an important part of the automobile transmission shaft. Without them, your car would have no wheeled suspension. Without them, your vehicle will have a rickety front end and a wobbly rear end. Because cars can’t drive on ultra-flat surfaces, they need flexible driveshafts. The U-joint compensates for this by allowing it to move up and down with the suspension.
A proper inspection will determine if your u-joints are loose or worn. It should be easy to pull them out. Make sure not to pull them all the way out. Also, the bearing caps should not move. Any signs of roughness or wear would indicate a need for a new UJ. Also, it is important to note that worn UJs cannot be repaired.

Symptoms of Driveshaft Failure

One of the most common problems associated with a faulty driveshaft is difficulty turning the wheels. This severely limits your overall control over the vehicle. Fortunately, there are several symptoms that could indicate that your driveshaft is failing. You should take immediate steps to determine the cause of the problem. One of the most common causes of driveshaft failure is a weak or faulty reverse gear. Other common causes of driveshaft damage include driving too hard, getting stuck in reverse gear and differential lock.
Another sign of a failed driveshaft is unusual noise while driving. These noises are usually the result of wear on the bushings and bearings that support the drive shaft. They can also cause your car to screech or scratch when switching from drive to idle. Depending on the speed, the noise may be accompanied by vibration. When this happens, it’s time to send your vehicle in for a driveshaft replacement.
One of the most common symptoms of driveshaft failure is noticeable jitter when accelerating. This could be a sign of a loose U-joint or worn center bearing. You should thoroughly inspect your car to determine the cause of these sounds and corresponding symptoms. A certified mechanic can help you determine the cause of the noise. A damaged propshaft can severely limit the drivability of the vehicle.
Regular inspection of the drive shaft can prevent serious damage. Depending on the damage, you can replace the driveshaft for anywhere from $500 to $1,000. Depending on the severity of the damage and the level of repair, the cost will depend on the number of parts that need to be replaced. Do not drive with a bad driveshaft as it can cause a serious crash. There are several ways to avoid this problem entirely.
The first symptom to look for is a worn U-joint. If the U-joint comes loose or moves too much when trying to turn the steering wheel, the driveshaft is faulty. If you see visible rust on the bearing cap seals, you can take your car to a mechanic for a thorough inspection. A worn u-joint can also indicate a problem with the transmission.
air-compressor

The cost of replacing the drive shaft

Depending on your state and service center, a driveshaft repair can cost as little as $300 or as high as $2,000, depending on the specifics of your car. Labor costs are usually around $70. Prices for the parts themselves range from $400 to $600. Labor costs also vary by model and vehicle make. Ultimately, the decision to repair or replace the driveshaft will depend on whether you need a quick car repair or a full car repair.
Some cars have 2 separate driveshafts. One goes to the front and the other goes to the back. If your car has 4 wheel drive, you will have two. If you’re replacing the axles of an all-wheel-drive car, you’ll need a special part for each axle. Choosing the wrong 1 can result in more expensive repairs. Before you start shopping, you should know exactly how much it will cost.
Depending on the type of vehicle you own, a driveshaft replacement will cost between PS250 and PS500. Luxury cars can cost as much as PS400. However, for safety and the overall performance of the car, replacing the driveshaft may be a necessary repair. The cost of replacing a driveshaft depends on how long your car has been on the road and how much wear and tear it has experienced. There are some symptoms that indicate a faulty drive shaft and you should take immediate action.
Repairs can be expensive, so it’s best to hire a mechanic with experience in the field. You’ll be spending hundreds of dollars a month, but you’ll have peace of mind knowing the job will be done right. Remember that you may want to ask a friend or family member to help you. Depending on the make and model of your car, replacing the driveshaft is more expensive than replacing the parts and doing it yourself.
If you suspect that your drive shaft is damaged, be sure to fix it as soon as possible. It is not advisable to drive a car with abnormal vibration and sound for a long time. Fortunately, there are some quick ways to fix the problem and avoid costly repairs later. If you’ve noticed the symptoms above, it’s worth getting the job done. There are many signs that your driveshaft may need service, including lack of power or difficulty moving the vehicle.

China Professional Solar Tracker System Single Axis with Linkage Motor Drive Solar Power Panel Tracking System     near me shop China Professional Solar Tracker System Single Axis with Linkage Motor Drive Solar Power Panel Tracking System     near me shop