China Standard Hydrostatic 4 Wheel Drive 3 Ton Telehandler Telescopic Loader with 1.5cbm Shovel Bucket for Sale with Hot selling

Product Description

Hydrostatic 4 Wheel Drive 3 Ton Telehandler Loader with 1.5cbm Shovel Bucket for Sale
 

Product Description

 

STEEL CZPT M630-70 telehandler forlift follows the common system on famous band like JCB, Manitou, Gine, etc. has three selectable steering modes. Two-wheel steering is perfect for roading; four-wheel steering provides great manoeuvrability in tight spaces; and crab steering is designed to edge your Loadall either close to or away from walls and buildings.

 

It was designed to be operated on narrow spaces, slippery ground and can handle with heavy workloads. Its compact dimensions, incredible manoeuvrability, unparalleled build quality and all-day operator comfort are just the ideal machine you are looking for.

As a purpose-built machine to the exact needs of agricultural operators. You can therefore also expect maximum productivity, efficiency , safety and serviceability.

Product Parameters

Engine  Kohler EPA Tier 4 / CZPT / Chinese
Rated power  55kw~75kw
Dimension (LxWxH) 4250x2200x2490mm
Rated loading capacity  3000kg 
Max. Lifting height  7000mm
Max. Loading capacity in levelwith boom extended  1500kg
Max. Reach in level with boom extended  4000mm
Speed  10/24km/h 
Min. Turning radius  3700mm
Truning angel  35 degree
Operating weight  6500kg 
Track  1785mm
Wheelbase 2500mm
Tire 16/70-20
System pressure  20Mpa
Hydraulic output  96L/min

Detailed Photos

 

4 x 4 wheel driving and steering
Fantastic maneuverability in rough terrain.

One switch control 3 driving mode:
Front wheel steering for road driving
Front & rear wheel steering, min. turning radius for operation in limited operating space.
Crab driving for special purpose
 

4 wheel steering, min. turning radius               Front steering for road driving                  Crab steering for purpose driving

Hydraulic quick hitch for various attachments

Front output for hydraulic attachments like 360 degree rotating forklift

Customized color acceptable

 

Packaging & Shipping

Thanks to the very compact design, STEEL CZPT M630-60 telehandler can be driven into container directly and fully assembled.

Loading condition: 1 set/20ft GP; 3 sets/40ft GP

 

Company Profile

 

Direct Manufacturer, 100% guarantee!!
 
We are direct manufacture factory, every aspect in a deal that customer concerns is guaranteed, like price, quality, delivery time and after service.
 
We devoted to offering 1 stop shopping and solution to customers’ needs. The products we currently offer covering loaders, telehandlers, excatators and loader attachments. Besides we have our own engineering team, can make customized design/product.  
 
“Honest” is our business way. We appreciate customers’ trust, and we are always CZPT as return.
 
We choose “STEEL CAMEL” as our brand  name, as all our products were designed for heavy duty work, trouble less and more service, like the what the CZPT do for people.

FAQ:

1. Are you manufacturer?

Yes.
We are factory in CZPT city, ZheJiang province, near HangZhou port. 
By fast train to CZPT station, from ZheJiang , 3-4 hours; from ZheJiang , 2-3 hours. 

2. Do you have warranty?

Yes, all machines have 18 months or 1000 hours warranty, whichever comes first
Warranty starts from the time you receive the machines, not include production and shipping time.
Within warranty, all parts are offered for free. Exceed warranty, all parts are offered at cost prices.

3. Do you have after-sale service?

Yes.
After order, we will start production quickly and keep updated.
After shipment, we will track the shipping and keep updated.
After you receive machines, we will instruct the usages and maintenance.
During usage, if any problems, we will offer timely and complete solutions.
We offer servicing for the whole lifetime of machines, no worry for personal use or resell.

If any query, please do not hesitate to send me an inquiry. I will feedback asap.

 

How to Identify a Faulty Drive Shaft

The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from 1 side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:
air-compressor

Symptoms of Driveshaft Failure

If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.

Drive shaft assembly

When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.
air-compressor

U-joint

Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are 2 types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.

tube yoke

QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at 1 end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are 2 types of lug structures: 1 is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.
air-compressor

end yoke

The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.

bushing

The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.

China Standard Hydrostatic 4 Wheel Drive 3 Ton Telehandler Telescopic Loader with 1.5cbm Shovel Bucket for Sale     with Hot sellingChina Standard Hydrostatic 4 Wheel Drive 3 Ton Telehandler Telescopic Loader with 1.5cbm Shovel Bucket for Sale     with Hot selling